The PCMCIA port

Pin configuration for the Amiga PCMCIA port.

	Namn	Beskrivning		Namn	Beskrivning
1	GND	Ground	35	GND	Ground
2	D3	Data Bus Bit 3	36	CC_CD1	Card Detect?
3	D4	Data Bus Bit 4	37	D11	Data Bus Bit 11
4	D5	Data Bus Bit 5	38	D12	Data Bus Bit 12
5	D6	Data Bus Bit 6	39	D13	Data Bus Bit 13
6	D7	Data Bus Bit 7	40	D14	Data Bus Bit 14
7	CE1		41	D15	Data Bus Bit 15
8	A10	Address Bus Bit 10	42	CE2
9	OE		43	--
10	A11	Address Bus Bit 11	44	RFU IORD	I/O Read
11	A9	Address Bus Bit 9	45	RFU IOWR	I/O Write
12	A8	Address Bus Bit 8	46	A17	Address Bus Bit 17
13	A13	Address Bus Bit 13	47	A18	Address Bus Bit 18
14	A14	Address Bus Bit 14	48	A19	Address Bus Bit 19
15	WE PGM		49	A20	Address Bus Bit 20
16	BSY IREQ		50	A21	Address Bus Bit 21
17	+5V	+5V	51	+5V	+5V
18	VPP1		52	VPP2
19	A16	Address Bus Bit 16	53	A22	Address Bus Bit 22
20	A15	Address Bus Bit 15	54	A23	Address Bus Bit 23
21	A12	Address Bus Bit 12	55	A24	Address Bus Bit 24
22	A7	Address Bus Bit 7	56	A25	Address Bus Bit 25
23	A6	Address Bus Bit 6	57	--
24	A5	Address Bus Bit 5	58	RESET	Reset
25	A4	Address Bus Bit 4	59	WAIT	Processor Wait
26	A3	Address Bus Bit 3	60	--
27	A2	Address Bus Bit 2	61	REG
28	A1	Address Bus Bit 1	62	BVD2 SPKR
29	A0	Address Bus Bit 0	63	BVD1 STSCHG
30	D0	Data Bus Bit 0	64	D8	Data Bus Bit 8
31	D1	Data Bus Bit 1	65	D9	Data Bus Bit 9
32	D2	Data Bus Bit 2	66	D10	Data Bus Bit 10
33	WP IOIS16		67	CD2
34	GND	Ground	68	GND	Ground

Some of the pins in the port are intended as power supply for smaller external units. Only connect these if required by the external unit. Always try to take power directly from the PSU if possible.

Back to index